Lutron RadioRa Main Repeater RR-MAIN-REP-WH

Power Main / Auxiliary Repeater: 9 V 300 mA DC adapter: Input: 120 V 60 Hz 6.5 W Output: 9 V 300 mA Typical Power Consumption Main Repeater: 3.1 W Test conditions: one LED on, Ethernet cable plugged in, powered by the 9 V adapter supplied. Auxiliary Repeater: 0.6 W Test conditions: one LED on, powered by the 9 V adapter supplied. Regulatory Approvals DC adapter: UL Listed for U.S. and Canada, NOM Main / Auxiliary Repeater: FCC, IC, COFETEL Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing. Indoor use only. Low-Voltage Wire Type Two pair - one pair 18 AWG (1.0 mm 2 ), one pair 22 AWG to 18 AWG (0.5 mm 2 to 1.0 mm 2 ) twisted shielded - NEC ® Class 2 / PELV cable. Communications Repeaters communicate with the system through RF. All devices (except remote dimmers / switches) must be located within 30 ft (9 m) of a Repeater. All Repeaters must be within 60 ft (18 m) of another Repeater. ESD protection Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2. Surge Protection Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. Power Failure Power failure memory: should power be interrupted, the Repeater will return to its previous state when power is restored. Mounting Mount on a wall, ceiling, or level surface using the two #6 (M3) screws provided. Connections Main Repeater: Ethernet, RS232, RS485 and USB (Lutron use only.) Auxiliary Repeater: RS485 Warranty 1 Year Limited Warranty. http://www.lutron.com/resiinf o